RetekessTD162 Restaurant Pager Buzzers System FAQ

1. How to pair/how to set pager ID/how to add extra pager?

Paring Pager ID Setting (F2)

Press “Call” and “Delete” buttons at the same time to enter the setting

mode, “F1” shows on display, enter number “2” through the keypad,

“F2” shows on display.

Press “Call” button to enter sub-menu, “0” shows on display.

Enter the ID number through Keypad (1-998).

Remove the pager from charging slot, and press “Call” button within 5s,

at the same time, the pager flashes and beeps. It means to be set successfully ssfully. Then it will return back to “F2”

You can also refer to the video at the link below

https://www.youtube.com/watch?v=ihR72Q3TxMI

2. How to change the reminder mode?

TD162 pager can send out beep reminder, flash reminder and vibration reminder. The speed of flash and buzzer can be adjusted or turned off completely. The vibration reminder can be turned off or on. Below is how to set it up.

Beep Prompt Speed Setting (F4)

Press “Call” and “Delete” buttons at the same time to enter the setting mode, “F1” shows on display, enter number “4” through the keypad, “F4” shows on display. Press “Call” button to enter sub -menu, “0” shows on display. Enter the desired value (0 for turn off beep, 1 for slow mode, 2 for medium speed, 3 for fast mode). Remove the pages from charging slots, and press “Call” button Within 5s, at the same time, the pages flash and beep. It means to be set successfully. Then it will return back to “F4” automatically.

Vibration Prompt Setting (F5)

Press “Call” and “Delete” buttons at the same time to enter the setting mode, “F1” shows on display, enter number “5” through the keypad, “F5” shows on display. Press “Call” button to enter sub -menu, “0” shows on display. Enter the desired value (0 for turn off vibration, other values for turn on vibration mode). Remove the pages from charging slots, and press “Call” button within 5s, at the same time , the pages flash and beep. It means to be set successfully. Then it will return back to “F5” automatically.

Flash Prompt Speed Setting (F6)

Press “Call” and “Delete” buttons at the same time to enter the setting mode, “F1” shows on display, enter number “6” through the keypad, “F6” shows on display. Press “Call” button to enter sub -menu, “0” shows on display. Enter the desired value (0 for turn off flash, 1 for slow mode, 2 for fast mode, 3 for breathing light mode). Remove the pages from charging slots, and press “Call” button within 5s, at the same time, the pages flash and beep. It means to be set successfully. Then it will return back to “F6” automatically

You can also refer to the video at the link below

https://www.youtube.com/watch?v=ihR72Q3TxMI

3. How to set the reminder duration?

Press “Call” and “Delete” buttons at the same time to enter the setting

mode, “F1” shows on display, enter number “3” through the keypad,

“F2” shows on display. Press “Call” button to enter sub-menu, “0” shows on display. Enter the desired reminder duration through Keypad (0-250s, if you set 0s, the pager will not stop automatically until you put it back to the charging slot) Remove the pages from charging slots, and press “Call” button within 5s, at the same time, the pages flash and beep. It means to be set successfully. Then it will return back to “F3 " automatically.