Sometimes our customers wonder why TD156 starts to alarm but no one calls it.
Is it broken?
Actually not.
If TD156 alarms but no one calls it is because of the automatic repeat call function or the out-of-bounds reminder function.
Out-of range alarm
The pager will alarm when it is out of range. This also happens when the keyboard is powered off.
Press the SETTING key to enter the password verification interface, enter the password when the display shows "----", the default password is "2580". After entering the password, enter the function interface, the screen displays "F1", enter the number 3 or press the UP or DOWN key to select the F5 function, and then press the ENTER key to enter the corresponding setting interface.
After the access to F5 function interface, the display shows the current alarm time after overstepping and you can select your desired time. When the Pager is out of transmission range of keypad for a certain length of time, it will trigger an alarm.
The pager shows "99” with vibrating and blinking. The time can be set to 0-30 minutes (0 means the alarm is off. And the other number stands for the time, after which the alarm begins to go off. )
What is the automatic repeat call function?
It is to prevent customers from missing the first call. This function will trigger a countdown such as a 1-minute or a two-minute countdown after the pager is called by the keyboard. When the pager is not put back to the powered base after the timer ends, it will sound an alarm to remind the customer to return the pager.
When the meal is ready, the waiter will use the keyboard to call the customer. If the customer is not near the pager at this time, who knows? He or she went to the bathroom or came out to answer a mobile phone call. Or the customer accidentally forgot to return the pager when picking up the meal. This function can prevent the pager from being lost.
If you want to turn off this function, here are the steps:
Press the SETTING key to enter the password verification interface, enter the password when the display shows "----", the default password is "2580". After entering the password, enter the function interface, the screen displays "F1", enter the number 3 or press the UP or DOWN key to select the F6 function, and then press the ENTER key to enter the corresponding setting interface.
Set the service countdown (F6)
After entering the F6 function interface, the display shows the current service countdown, and you can select the required countdown (0-99 minutes). 0 is to turn off this function.
After the countdown reminder, the notification will only be turned off when the pager is placed on the charging tray and powered on. When it sends a notification, the pager keeps vibrating and flashing, and the disc ID will be displayed on the display.
Press the SETTING key to return to the main interface.
Set the two keyboards to the same ID and the same channel.
Steps:
Step 1: Set the same channel value (F7)
After entering the F7 function interface, the display shows the current channel, and you can select the desired channel (channel 1-99, each number represents a channel). When you enter the desired number and press the ENTER key, the keyboard will beep at the same time, indicating that it is completed.
Step 2: Set the frequency (F9)
After entering the F9 function interface, the display shows the current frequency
, and you can select the desired frequency (channel 01-31, each number represents a frequency). When you enter the desired number and press the ENTER key, the keyboard will beep at the same time, indicating that it is completed.
Step 3: After the frequency and the ID of the home keyboard are changed, a new ID needs to be set for all pagers so that the coaster buzzer will beep.
Step 4: Match the pager and keyboard
After entering the F1 function interface, enter the two-digit ID of the pager (do not enter "99"), press the CALL key, the keyboard display will flash, place the pager about 10cm above the keyboard infrared communication device, if the pager has a buzzer and LED flashing, it means success.